1 · Inspect
Controls, airflow, and safeties are checked first, so the fault is found safely.
Air conditioning repair, maintenance, and installation in Everett, MA: airflow, refrigerant, controls, and drain faults handled before the next heatwave.
Everett Air HVAC provides air conditioning services for homes in Everett, Massachusetts. Air conditioning repair, maintenance, and installation in Everett, MA: airflow, refrigerant, controls, and drain faults handled before the next heatwave.
Call (617) 665-6978 and describe the symptom. You will get a clear next step, not a diagnosis guessed over the phone.

Filter and airflow, coil condition, refrigerant circuit, condensate drain, electrical controls, thermostat, and duct connections. Frozen coils are thawed and the cause — usually airflow or refrigerant — is found, not just re-gassed.
Controls, airflow, and safeties are checked first, so the fault is found safely.
Components are tested under real running conditions, not just looked at.
Options, costs, and trade-offs are discussed before work begins. You decide.
Safety first: If water is leaking near electrics, switch the system off at the thermostat and breaker if safe, and call. Do not run a frozen AC and hope it clears.

Every visit, big or small, starts with testing — and ends with an explanation you can check.
For air conditioning services in Everett, every visit follows the same standard: inspect, test, explain, then decide — with the fault shown to you, not just described.
Everett’s mix of triple-deckers, older single-family homes, and newer apartments means the same symptom can have different causes from one street to the next. Ductwork, insulation, system age, and fuel type all change the diagnosis. That is why inspection comes before any recommendation — and why a visit that starts with testing saves money compared with changing parts at random.
Helpful reading: Furnace Maintenance Basics for Everett HomesFurnace Repair vs. Replacement: How to Decide
Call (617) 665-6978
Describe the symptom on the phone — system type, fuel, and what changed — and we will talk through the next step.
Heating and cooling services for Everett homes. Each service has a clear description, a related photo, and a direct link to the full page.

No heat, cold air, short cycling, ignition faults, blower failure, and strange furnace noises in Everett homes — diagnosed and repaired by Everett Air HVAC.
Read More
Seasonal furnace maintenance in Everett, MA: safety checks, cleaning, airflow, ignition, and controls to keep your furnace reliable through a New England winter.
Read More
Furnace replacement in Everett, MA: right-sized, high-efficiency systems, honest repair-vs-replace advice, and clean installation with testing.
Read More
Boiler repair and maintenance in Everett, MA for radiators and baseboard heating in older homes, triple-deckers, and multi-family properties.
Read More
Whole-system heating repair in Everett, MA: uneven rooms, cold spots, thermostat and control faults, and systems that will not keep up in cold weather.
Read More
Heat pump repair, maintenance, and installation in Everett, MA for efficient year-round heating and cooling in homes with and without ductwork.
Read More
Ductless mini-split repair, maintenance, and installation in Everett, MA for rooms, additions, and triple-deckers without ductwork.
Read More
Ductwork inspection, sealing, repair, and airflow balancing in Everett, MA so heated and cooled air reaches every room.
Read MoreDirect answers for Everett homeowners. If your question is not here, call and ask.
A clogged filter, restricted airflow, dirty coil, refrigerant issue, or control fault can all cause it. The filter and airflow are checked first, then the coil and refrigerant circuit, so the cause is found rather than guessed.
A blocked condensate drain or a frozen coil that has thawed are common causes. If water is near electrics, switch the system off at the thermostat and breaker if safe, and call for advice.
Once a year, before summer. Filter, coil, drain, refrigerant circuit, controls, and thermostat are checked so the system is ready before the first heatwave, not during it.
Tell us what your furnace is doing, and we will talk through the next step.